TINIPACK VERTICAL PACKAGING UNIT

TINIPACK is a vertical packaging unit that forms and seals bags in one operation, thus allowing a continuos packaging cycle. The bag is formed from a roll of flat film; its side and bottom are sealed in one operation by an impulse seal that can be timed according to need.
Film is automatically advanced for the requested length that can be regulated from 5 to 28 cm. The inserting tube has a 10 cm diameter. Bags are always cm 17 wide.
The items to pack are inserted into the hopper and fall trough the inserting tube.
The sealing/cutting operation is started by the operator by a button or by pedal.
The machine seals the package and automatically prepares the bag for the next operation. When the arm reopens the sealed bag falls down and slides out of the machine, the film advances automatically for the pre-set length, controlled by encoder, and the bag is ready for the next filling operation.
The cycles will then be repeated automatically with the sequence chosen by the operator, who will take care only of inserting the items to pack.

Connection: V 220 single phase
Consumption: W 400 (only during the seal)
Seal: impulse ribbon seal 3 mm wide, operated by electronic timer, with separate electronic control for the temperature of the vertical and horizontal sealing bar.
Regulations: sealing and cooling time can be regulated on the display machine includes pre-set programs for the most common films.
Movement: by compressed air
Films to use: polyethylene (LD, HD) cast polypropylene (PP) Perforated PP some types of BOPP
Film thickness: from 50 to 90 microns
Machine dim.: cm. 90x110x150 h
Weight: kg. 220